Apollo 600 Lens Maintenance

APH60000 - Inner Lens

APH60000

Replacing Inner Lens


1. Open Frame

Open latch and fully open the frame

2. Remove Inner Lens

- Open window gasket in upper area from outside by hand
- With the other hand press out lens from inside
- Check that window gasket still fits well

3. Place new lens

- Clean gasket and moisten groove for lens with mild soapy water
- Place new lens centred on gasket and push it around into the groove of the gasket. Avoid scratches on the lens.

4. Close frame again

Hook the frame in latch and close it.

 

APH60001 – Intermediate Lens

APH60001

APH60002 – Outer Lens

APH60002

Up to five outer lenses may be installed at one time. For maximum visibility we recommend to install only so many lenses to last for a work period.
Preparing lenses in the following manner will permit lenses to be pulled off easily by a user wearing heavy gloves:

1. Open frame

Open latch and fully open frame.

2. Remove outer lenses

Remove outer lens carefully from plastic locating pegs

3. Remove used outer lenses

Remove perforated outer lenses and/or rims of used outer lenses from plastic locating pegs

4. Fit new perforated outer lenses

Position tabs to hinge side and pull through all tabs except the last and press outer lenses on to plastic locating pegs.

5. Fit new intermediate Lens

When fitting the new intermediate lens, check that there’s no dust or dirt between the lenses.
Press outer lens onto plastic locating pegs.

6. Close frame again

Hook the frame on to the latch and close it.